- Cruising Speed: 32.15 kn
- Maximum Speed: 39.97 kn
- Beam: 16' 6''
- Hull Material: Composite
- Max Draft: 2' 7''
- Fuel Tank: 1 x 422|gallon
- Fresh Water: 1 x 105|gallon
- Holding: 1 x 13|gallon
- Cabins: 1
- Heads: 1
Italian builder Anvera redefined the segment with this incredible vessel, combining the winning components of multiple different categories into one ultimate day-boat. CLOUD 9 combines Surface drive performance, Carbon Fiber construction and finishes, and hypalon tube practicality all come together in this amazing yacht. At full throttle the yacht easily reaches speeds of over 40 knots, while at anchor the aft section balconies open up to create a 250 sq ft beach club paradise.
The yacht has benefited from a complete 2021 refit of her machinery, paint, tubes, and electronics, with all annual service complete for 2024, making her a worry free yacht that is turn-key and ready to immediate enjoyment. If you're searching for the ultimate head-turning luxury day-boat, you must see CLOUD 9.
Denison Yachting is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Reel Deal Yachts.
Denison Yacht Sales offers the details of this yacht in good faith but can’t guarantee the accuracy of this information nor warrant the condition of this boat for sale. This yacht for sale is offered subject to prior sale, price change, or withdrawal from that yacht market without notice. She is offered as a convenience by this yacht broker to its clients and is not intended to convey direct representation of a specific yacht for sale.
BROKER’s COMMENTS – THE PERFECT DAY CRUISER AND CHASE BOAT
CLOUD 9 has benefited from the ideal Ownership under intense attention to detail, grasping perfect cosmetic and mechanical condition to allow the Owner to embrace CLOUD 9’s full performance, amenities and comfort. No stone is left unturned on this high-performance vessel with a detailed maintenance list below; CLOUD 9 offers comfort, space, performance and looks without compromise.
MANUFACTURER DISCRIPTION - CONSTRUCTION PROCESS & DESIGN
Anvera is the result of a ten-year experience accrued in competitions, most notably class 1 Offshore, but also in industrial sectors with a high technology content. This craft is not only lightweight, but also exceptionally resistant and safe; it requires complex and technological design, the use of special materials and attention to the smallest details. Moreover, the materials include hardly any wood. The Anvera 55 is built using unidirectional or multiaxial carbon, very thick high-density PVC, and epoxy resin. All these materials are strong, as well as having high resistance to stress and impact.The hull follows a hydrodynamic approach: Anvera’s top side, on the other hand, is aerodynamically designed, thanks to the valuable collaboration with Aldo Drudi’s firm D-Perf. The yacht is shaped by two 12 m risers with a wing profile which enclose the deckhouse, the control deck and the cockpit cover. A beautiful and harmonious vent leads the air through the integrated conduits to the single lightweight column supporting the superstructure.
SPECIFICATION
TYPE
Twin Screw, Surface drive, planing deep V hull, Motor Yacht
FLAG USA
CLASSIFICATION CEE B
CONSTRUCTION Hull: Carbon, Epoxy resin
Superstructure: Carbon, Epoxy resin
Deck: Teak laid
MAIN MACHINERY
MAIN ENGINES 2 x 550 hp Cummins Diesel Engine, QSB 6.7 (2021)
ENGINE HOURS 23 January 2024Port: 210 hrsStarboard: 210 hrs
GEARBOXES 2 x ZF 286 A (2021)
SHAFTS & PROPELLERS 2 x Top System TS55 “Anvera” (2021)
AUXILIARY & ANCILIARY EQUIPMENT
GENERATOR 1 x 13kW Fisher Panda
GENERATOR HOURS 23 January 2024Main:285 hrs
BATTERIES All replaced from 2021 onwards
BOW THRUSTER 1 x Yes
STERN THRUSTER 1 x Yes
AIR CONDITIONING Yes 10,000 BTU
SHORE POWER CONVERTER The vessel is built and equipped with 220v monophase 50 Hz wiring “EU Spec”, she is however equipped with an integrated converter allowing her to plug into US shore power.
AUTOTRIM Yes
TROLLING VALVE Yes, on gearbox for reduced speed manoeuvres
BOILER 1 x Yes
DECK EQUIPMENT
GANGWAY Besenzoni SP601 retractable ladder gangway “up and down staircase” may be used to access the water
WINDSCREEN Electronically adjustable / retractable windscreen
SHOWERS 1 x Bow1 x Stern
WINDLASS 1 x with chain counter
FOLD DOWN TERRACES 1 x Starboard1 x Port
WATER TOY STORAGE 2 x suitable for seabobs
BIMINI 1 x Awning with 4 carbon fiber poles
UNDERWATER LIGHTS 2 x aft
NAVIGATION & COMMUNICATION EQUIPMENT
ENGINE DISPLAY 2 x 7” Mercury Screens
PLOTTER 1 x 16” Simrad Plotter
AUTOPILOT Yes
VHF VHF II Radio
CAMERA 1 x Camera on the anchor
1 x Camera on the aft
2 x Cameras in the engine room
ACCOMODATION
GUEST 1 x Full height master cabin with ensuite shower and toilet
CREW (storage) 1 x Crew cabin with twin bunks (commonly used for storage)
CAPACITIES (approximate)
FUEL 1.600 litres / 422 US Gallons
WATER 400 litres / 105 US Gallons
BLACK WATER 50 litres / 13.2 US Gallons
GREY WATER 3 litres / 0.7 US Gallons
INFOTAINMENT
AUDIO SYSTEM Fusion multi zone
TELEVISION 1 x Flat screen in main cabin
MAINTENANCE
2020/2021 – Florida, USA
90% rebuild including but not limited to:
- New Engines
- New Gearboxes
- New Paint (total repaint)
- New Propellers
- New Top System drives
- Upgraded Top Systems Drives TS55
- Teak sanded
- Renewal of all carbon fibre elements including new clear coats
- New Trona cushions
- Lean Marine installed 75W Isolation Transformer, which allows the yacht to plug
into both American and European power. Including an upgraded shore power cable
to match
2022/2023 – Florida, USA
- New Tubes
- Engines Serviced
2023/2024 – Florida, USA
- Teak treated (no sanding)
- Tubes cleaned
- Fresh coat of bottom paint
- Fresh Propspeed
- Top Systems drives rebuilt at the manufacturer
- New interior carpet
- New switch gears
- Propellers tuned
- Stern Thruster serviced
- New bed sheets (never slept in)
- New upgraded bilge pumps in engine and technical room
- Generator service by authorized dealer
- Main Engines serviced by Cummins Authorized tech
- New Batteries, APM, motors, service
- New Depth Finder transducer
Contact our team to schedule a private showing.