JANGLE Boat for Sale

• Beam: 11' 11''
• Hull Material: Composite
• Max Draft: 7' 3''
• Heads: 1

Hull & Deck

• Infusion molded sandwich construction using uni-and multi-directional fiberglass, low density balsa core, vinylester resin and the “SCRIMP” patented resin infusion process
• White gelcoat hull finish with integrated gelcoat double boot stripe in grey
• Teak deck
• Hull-to-deck joint is bonded with a methacrylate structural adhesive
• Transverse / longitudinal grids and mast step are infused as part of the hull molding
• Infusion molded, main bulkhead
• All intermediate bulkheads are glassed to hull and deck for stiffness
• Low VCG keel with encapsulated cast iron fin with lead bulb, bolted and bonded to shallow sump, with seamed joint to allow for easy removal
• ORC legal foredeck toe rails molded into the deck
• Large capacity self draining foredeck chain locker, with space for optional windlass
• Two side lockers in cockpit, each capable of life-raft stowage
• One aft locker in cockpit sole (aft of wheel)
• Removable aft locker/dock box
• One Gas/LPG bottle locker, vented and drained overboard
• Integrated mounting in seahood for dodger attachment. Seahood with instrument pod
• Transom platform with removable swimming ladder
• Balanced, composite rudder using uni and multi-directional fibreglass on high resistance stainless steel stock, turning on JP3 self-aligning bearings

• Volvo Penta D2-40F (made by Perkins)
• Transmission 130S

• North Cruising main, Jib and A-2 2014 (light use)

2017

• Doyle Stratis main 
• Doyle Stratis J-2 
• Doyle Stratis J-3 

2019

• North J-1 3Di Raw
• North J-2 3Di Endurance
• North J-3 3Di Endurance
• North A-2 

2021

• North Main 3Di Raw 2 reefs
• North J-4 3Di Endurance

2023

• North BR0 3Di Raw
• North Code Zero (helix luff)
• North J-1 3Di Raw
• North J-2 3Di Endurance with Reef
• North A-4

2023 sails all very lightly used.

Deck Hardware
• Two Harken 60.2 STA self-tailing primary winches. (upgraded from 50.2)

• Two Harken 46.2 STA mainsheet winches

• Two Harken 46.2 STA halyard winches on aft end of coachroof (upgraded from 40)
• Four winch handle holders

• Below decks 2:1 Harken mainsheet system starting at the traveler, led forward through the boom, down to sidedecks, then aft under deck to cockpit winches

• Harken adjustable mainsheet traveler with 6:1 purchase with ratchets and cam cleats attached to car

• Harken jib tracks, with ball-bearing car system and adjustable purchase led to the cockpit

• Two Harken footblocks for jib sheets

• Harken spinnaker sheet blocks mounted on thu-deck U bolts

• Five mast base turning blocks

• Two 4-sheave deck organizers to lead halyards and reef lines aft

• Four stoppers on each side of coachroof

• Spinnaker tack line led aft to stopper on starboard side of coachroof

• Roller furling control line led aft to stopper on port side of coachroof

• Bowsprit control line led to cockpit

• Bow roller

• Six mooring cleats

• Stainless chainplates for shrouds and backstay

• One foredeck opening hatch (500 x 500 mm) with vent

• One opening hatch (340 x 200) for heads

• One opening hatch (340 x 200) for forward cabin

• One opening hatch (500 x 370 mm) for main cabin

• Two opening ports (304 x 155 mm) for forward cabin and heads

• Large fixed window (P & S) in main salon with single opening port

• Four opening ports for aft cabins (two on sides, two in cockpit)

• Two line bags

• Option for large companionway dodger with removable sides and opening front

• Stainless handrails on top of coachroof

• Double rail stainless pulpit and pushpit

• Double lifeline system with 8 stanchions including 4 with reinforcing leg

• 59 inch aluminum racing wheel, leather covered, mounted to custom molded pedestal, with wheel well and drain

• Compass on wheel pedestal with stainless binnacle guard

• Acrylic companionway washboard with lock, stored in aft cockpit locker

• Removable and retractable swim ladder

• Flagstaff holder integrated into pushpit leg

• Emergency tiller

• Upgraded traveller car sheaves/cam cleat

• The upgraded winches are all Harken Performa with the coach roof ones being the 46 quattros (bigger diameter on base for kite trimming). We also strengthened the deck around the primaries

• Pole out is 2:1

• Outhaul comes to coachroof (standard is to come out of mast)

• Vang comes to coachroof (standard is to come out of mast)

• Jib barber hauler

• Upgrade to Harken carbo foil (furler still available)

• Sparcraft aluminium mast, runnerless with double spreaders, mainsail track

• Aluminum boom, with 12:1 outhaul purchase system, two reef line sheaves, internal mainsheet anchoring point and forward articulated blocks to deck

• Pre-molded mast wedge system and adjustable mast step

• Discontinuous rod rigging (Nitronic 50). NDT'd December 2020

New Forestay 2020

• Remote panel hydraulic backstay adjuster with panel installed on forward face of pedestal

• SS hydraulic panel guard

• Jib furling system with integrated furler drum into the deck

• Retractable carbon bowsprit controlled from cockpit with watertight containment box draining overboard

• Solid boom vang with 24:1 integral purchase system

• Vectran mainsail and jib halyard

• One spinnaker halyard with snap shackle

• Sheet package of two spinnaker sheets, two jib sheets, one Dyneema main sheet and one Dyneema tack line with snap shackle

• Mainsail traveller lines

• Adjustable jib car lines

• Two reef lines

Running rigging Summer 2023 - kite halyard (sk78) - jib sheets - all halyards are sk78 

Standing rigging - all rods NDT tested Dec 2020 - new forestay Dec 2020

• Electric windlass in anchor locker
• Manual bilge pump in cockpit
• Electric bilge pump with switch from automatic to manual with control and individual warning light
• Shower drain pump with filter
• Pressurized water system
• 12V DC refrigeration
• Stainless water tank (42 gallon) under main cabin settee (additional water tank as option)
• Icebox drain
• 5 gallon hot water tank
• Marine WC
• Holding tank with pump-out
• Two 100 AH AGM type batteries & one 70 AH battery for engine, with switches. The batteries are charged by either the engine or the battery charger
• 12V electrical panel, with fuel gauge, voltmeter and amp meter
• 240V main circuit breaker and panel
• Halogen lights on ceilings and swiveling tulip lights in cabins
• Ceiling light in heads
• Low voltage LED navigation lights on pushpit and pulpit
• Steaming light and mooring light
• Grounding system for protection against lightning
• Mastervolt battery charger

• Cold-molded, solid, and laminated walnut, finished in satin varnish.  White finish on main bulkhead
• Removable, wood effect veneered floor panels with lockdown hardware and ss metal ferrules and flush fasteners
• White wood hull lining effect in main cabin. Vinyl lining on hull sides in sleeping cabins
• Cored and insulated doors to all cabin areas

FORWARD CABIN

• Large double V-berth with top access lockers below
• Large hanging locker, desk with storage above and below
• Locker and bookshelf on port side
• Shelf above berth on port side, bow sprit containment area to starboard
• Access door to main cabin and forward head

FORWARD HEAD

• Integrally molded for easy maintenance, with shower tray, sink with access below to seacocks, toilet roll holder
• Sink is recessed in synthetic resin colored worktop, with rail for hand towel
• Retractable faucet/shower with pressurized hot and cold water
• Electric shower drain pump
• Large storage area along the hull side with dual hinged & angled mirror doors
• Recessed access door to main and forward cabins

AFT CABINS (Port & Starboard)

• Large hanging locker
• Locker with doors, storage below and above
• Shelf along the hull side
• Large double berth
• Access door to engine
• Option for extra water tank under berth (Starboard cabin)
• Recessed access doors to main cabin

CHART TABLE (to port)

• Large forward facing chart table
• Chart and navigation tool storage under table top lid
• Locker under chart table
• Top access bookshelf/bin locker outboard
• Large hinge panels outboard for instruments
• Navigator’s seat with storage below
• Large storage locker and shelf aft of nav seat with hinge down access panel on forward face

MAIN CABIN

• Settee/berths to port and starboard
• Drop leaf table with integrated rails and bottle storage compartment
• Large storage lockers behind backrests
• Water tank and fuel tank under settees
• Two stainless handrails on overhead
• Bookshelves
• Double hull windows on each side
• Integrated, sliding curtains

L-SHAPED GALLEY (to starboard)

• Gimbaled LPG gas stove with oven and 2 burners, with s/s protection bar
• Double s/s sink unit recessed in synthetic resin worktop
• Pressurized hot and cold water
• Large 150 liter molded icebox/fridge, with single top access, divider, storage shelf and 12v compressor
• Two utensil drawers
• Large storage under drawers
• Storage under sink with shelf
• Trash bin with direct access from worktop
• Full length locker outboard of galley worktop with crockery storage system
• White laminate finish for better wear resistance
• Open locker/molded shelf for loose deck gear
• Steps with angled treads between bulkheads
• SS handrails mounted between bulkheads
• Front engine access via piston assisted hinge-up lid