Luscious Yacht for Sale | 29 Morris Yachts Flowery Branch, GA

Luscious Boat | 29' Morris 2016

The M29 evolved from the success of her larger sister, the M36 Daysailer. Keeping the combination of stunning traditional aesthetics with modern naval architecture and materials, the M29 provides a tiller for ultimate feel under sail. Sail handling is simplified with a self tacking jib with all control lines led back to the cockpit. Clever use of block and tackles under deck provide mechanical advantage, allowing the elimination of winches, resulting in a clean and simple layout. Underway, the modified fin keel with bulb and carbon spade rudder produce nimble and lively performance under sail or motor.

LUSCIOUS is a beautiful example of the M29 and has been a fresh water boat since new. Carefully maintained by her original owner, she was tastefully customized and is in the water and ready to go for her next owner. An included custom trailer simplifies transport and storage.

Denison Yachting is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Hinckley Yacht Brokerage.

Denison Yacht Sales offers the details of this yacht in good faith but can’t guarantee the accuracy of this information nor warrant the condition of this boat for sale. This yacht for sale is offered subject to prior sale, price change, or withdrawal from that yacht market without notice. She is offered as a convenience by this yacht broker to its clients and is not intended to convey direct representation of a specific yacht for sale.

HULL/DECK

Infused fiberglass composite hull with Vinylester resin throughout and Balsa SB.50 core
Molded integral furniture and internal structure (IGU)
External modern fin design lead keel with a palm is mounted in a molded hull recess with 316 SS bolts.
Fiberglass engine bed integral with IGU
Infused fiberglass structural forward bulkhead with chainplate reinforcements
Infused fiberglass composite deck with Vinylester resin throughout and Balsa SB.50 core
Core removed in areas of deck hardware and through hull fittings.
“Super Jet Black” Awgripped hull
Deck Gelcoat: Oyster white with molded Tan non-skid
Hull topsides: Oyster White gelcoat
Cove Stripe: Awlgrip Cordova Gold
Boot Stripe: Awlgrip Cream (#H8002)
Bottom Paint: Interlux Micron Extra “Black”

DECK HARDWARE:

Sailing hardware is Harken
Fiberglass sail locker hatch.
Fiberglass tiller cover hatch.

Varnished teak toe rail
Custom cast SS bow and stern chocks that integrate beautifully with the teak toe rail.
SS 8” Pull-Up cleat at the bow
SS 8” fixed mooring cleat on the stern deck
Midship toe rail chocks and (2) 4” folding deck cleats.
Varnished teak eyebrow trim
Varnished teak dorade boxes with SS cowl vents
Varnished teak hand rails on the cabin top
Varnished teak coaming cap
Varnished teak flag staff & US Flag
Custom MY cast SS cockpit drains
Two-piece SS midship folding ladder w/ PVC treads.

COCKPIT:

Optional varnished teak cockpit table and mounting base
Optional cockpit seat cushions of 2” closed cell foam covered with Sunbrella fabric in “Toast”.
Optional SS line storage bar in the port cockpit locker
SS drink holders under tiller hatch

INTERIOR:

Fiberglass floor pan with oiled Teak cabin sole.
Cherry wood trim on window frames, main bulkhead opening and bunk rails.
Cherry hull sheathing
Removable bulkheads separate the cabin space from the sail locker storage area.
Port sail locker floor with tall fiddles to organize gear storage
Sunbrella canvas interior cushions in “Ivy” (#4632)
Optional varnished cherry forepeak access doors with cherry frame.
Optional main cabin shelf above the port main cabin settee.
(2) Optional “Auckland” LED reading lights above the settees.
(2) Optional Hella “Turbo” fans in the cabin outboard of the reading lights port and starboard.
(2) Optional fiberglass storage bins under each of the main cabin settees, port and starboard.
Optional forepeak floor grate

MECHANICAL:

Engine:

Yanmar 2YM15C x SD Saildrive unit, 2-cylinder, direct-injected, fresh water-cooled marine diesel engine, maximum 14 Hp @ 3600 RPM
Flex-O-Fold folding two blade propeller
Yanmar instrument panel at the helm, with ignition switch, stop button, tachometer and audible alarms for cooling water high temperature an low oil pressure.
SS single lever throttle and shift control
Engine box is fitted with Soundown Vinyl/Foam composite noise reduction insulation
Racor model #215 spin-on fuel/water separator
(1) 8-gallon fuel tank with deck filler cap.
(1) Fuel gauge
Whale Gusher 10 manual bilge pump located near helm in cockpit
Whale Gulper IC electric bilge ump with water sensor control.
Optional Lavac marine toilet with 5 gallon holding tank and deck pumpout.

Steering:

Tiller steering with laminated teak tiller
Forespare tiller extension with tiller lock box
Carbon fiber/epoxy rudder with carbon fiber rudderpost and (2) self-aligning rudder bearings

ELECTRICAL SYSTEM:

(1) Marine group 27/100 Amp-hour AGM battery
Yanmar 60 Amp/ 12 VDC alternator with internal regulator for battery charging
12 VDC distribution panel
(1) 12 volt outlet
(1) USB outlet
Marinco 15 Amp shore power inlet
Blue Sea digital voltmeter

ELECTRONICS & NAVIGATION EQUIPMENT:

B&G Triton instruments for depth, speed, and wind. (Two displays mounted on the starboard trunk cabin end about the chart plotter.)
B&G Zeus2 multi-function 9” Nav display mounted on the starboard trunk cabin end below the Triton instrument displays.
Optional varnished cherry instrument cover box
Raymarine ST1000 tiller pilot system in cockpit
Icom M424 VHF radio under cockpit seat with Icom HM195 remote microphone installed in port line organizer pocket.
Perko bicolor bow light with chrome plated brass housing
Perko transom stern light with chrome plated brass housing
Aquasignal steaming light on mast
Ritchie Venture bulkhead compass
Fusion 65OUD AM/FM stereo receiver with internal iPod dock, Bluetooth integration and a pair of 6” speakers mounted in the cockpit.

SPARS & RIGGING:

Carbon fiber mast and aluminum boom with Awlgrip finish
Fractional rig with swept back spreaders
Harken mainsail luff track system
Self-tacking jib on athwartships curved track
Harken manual headsail furling unit
Standing rigging is 1x19 SS wire rope
Hall A-12 mechanical vang with Harken block and tackle
Backstay adjuster with 18:1 purchase led to helm
Jib sheet with coarse and fine tune adjustment
Single slab reefing line led to the cockpit
Cunningham led to the cockpit
Outhaul adjustment on boom
Lewmar 16 STC chrome, self-tailing, single speed winch
Optional boom tent cover in “Toast”.
Running rigging is high quality low-stretch rope

SAILS:

Sail inventory is by North Sails
Dacron Mainsail with two full length battens, two leech battens and single slab reef
North Sails Quick mainsail cover with Lazy Jacks
Dacron Furling Jib with UV protective cover on leach

North G-AP3 Gennaker with a Bamar Roll-Gen furling system.
Custom “Sea Shepard” logo on the Gennaker

SAFETY

(2) Kidde Mariner 110 portable dry chemical fire extinguisher located in the accommodations
Engine compartment “Fire Port”

ADDITIONAL EQUIPMENT:

Triad custom galvanized boat trailer with torsion bar suspension, hydraulic surge brakes, adjustable poppets, bow stop with ladder, mast carrier, spare tire, ball hitch and tie-down straps.
11lb Claw anchor with 6ft of lead chain and 100 ft of ½” Yale Brait anchor rode in a canvas storage bag
(3) ½” dock lines
(3) 6” x 15” ribbed fenders with lines, Polar Fleece fender covers and a canvas storage bag.
(4) Adult Type II life jackets with a storage bag
Flare kit
Horn
Navigation rules of the road