- Beam: 14' 6''
- Hull Material: Fiberglass
- Displacement: 35,000 lb
- Fuel Tank: 1 x 120|gallon
- Fresh Water: 1 x 230|gallon
- Holding: 1 x 30|gallon
- Heads: 2
1104 views
"SERENE" is a 1996 48’ Cutter rigged; center cockpit Robert Perry designed Tayana 48 sailing vessel. The Tayana line of sailing vessels was heavily built coastal/offshore cruisers built for both near coastal as well as extended offshore blue water cruising. “Serene” is a very well-equipped Tayana 48 with a full complement of offshore sailing equipment that has been maintained by the present owners to very high standards. “Serene” is a turn-key vessel that is ready for any extended blue water cruising.
Manufacturer Provided Description:
The Tayana 48 is a superior combination of the advanced design concepts of Robert Perry and the incomparable boat building skills of the craftsmen at Ta Yang Yacht Building Co. Using the finest materials money can buy, Ta Yang puts together a yacht which has it all - speed under sail, safety in any sea condition and comfort found in few yachts of this size. The design target for the Tayana 48 was to produce a yacht that out-performs the competition in this size range in both boat speed and interior volume. This was achieved by a process not unlike the type used by racing yacht designers. Hull proportions were studied along with interior layouts to produce a yacht proving that space and comfort is achievable in a large cruising yacht without sacrificing speed and sailing ability. The oversize navigation area can be your office away from home. This boat has the ability to be pressed hard with good helm balance. The deck design makes her easily managed by a two-person crew. The extremely affordable Tayana 48 offers quality and performance that distinguishes her from every yacht in this size and class. CONSTRUCTION: Hand-laminated fiberglass hull with PVC foam construction with mat and woven rovings, isophthalic resins, isophthalic gelcoat on all exterior fiberglass surfaces. A matrix of longitudinal and transverse, foam-cored stringers in the lower hull providing maximum hull stiffness. Internal iron ballast glassed into a modified fin keel with choice of drafts. Skeg-mounted rudder, with internal stainless steel rudder post and integral stainless-steel reinforcement.
Denison Yachting is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Atlantic Yacht Works.
Denison Yacht Sales offers the details of this yacht in good faith but can’t guarantee the accuracy of this information nor warrant the condition of this boat for sale. This yacht for sale is offered subject to prior sale, price change, or withdrawal from that yacht market without notice. She is offered as a convenience by this yacht broker to its clients and is not intended to convey direct representation of a specific yacht for sale.
If you have never been aboard a fine quality Tayana sailboat, prepare for a treat. This Bob Perry designed boat, robust Taiwan construction, sensible & spacious layout and beautiful hand rubbed, satin varnish, teak interior. The large comfortable center-cockpit gives the helmsman and crew a commanding view of the entire deck and surrounding water. It also allows for a large, ample headroom master suite aft. Entering the companionway and stepping below one enters the spacious main salon. The companionway ladder is furniture quality with a custom clear Lexan back panel. Forward to port, is a cozy oval settee and custom folding teak table. Main salon lighting is excellent, featuring two large port and starboard windows. Teak and holly cabin sole throughout all cabins. There is plenty of storage space in all cabins. The overhead throughout is soft off-white vinyl. All light fixtures are Italian, gold-plated brass Cantalupi fixtures. The stereo speakers are recessed into the overhead and headliner. From the companionway, immediately to port is a spacious and comfortable galley, with many quality features. Immediately to starboard is a large "L" shaped navigation console with an adjustable, swiveling chair. Ahead to starboard is a straight settee. The custom folding teak table can be expanded to a full-size table for six or folded to accommodate 3-4. The table can also be lowered and locked to support an additional berth cushion to enable the settee to serve as an extra berth. The large, "L" shaped navigation console allows for two work areas. Over each area is plenty of room for electronics, radar, SSB, displays, radios, etc. The "L-shaped navigation console is a signature feature of the Tayana 48. The galley has several special features. The galley and passage aft are full height and run aft along the port side. The galley boasts a custom four burner stove with oven, two separate top and front access refrigerator and freezer compartments, plenty of storage, counterspace.
Ahead of the main salon is the customized forward guest cabin. It consists of a large cabin with a centerline V berth, and generous storage. The forward head has two entrances, one private entrance from the guest cabin, and another serving the main salon. The forward head is quite large, with vanity, stainless steel sink, Grohe fixtures 12-volt electric head, and shower. Aft of the main salon and galley is the aft master suite. It consists of a large cabin with a centerline queen, generous storage and a large ensuite head, vanity, stainless steel sink, 12-volt electric head and shower.
The Yanmar 88 hp engine and Phaser 7.0 kw generator are located amidships, in the central island, beneath the cockpit. The engine and generator compartment are accessible from the nav station, galley, salon, and aft head. Every cabin from bow to stern features opening deck hatches and ports for airflow and ventilation and offering plenty of natural lighting throughout.
MASTER CABIN
GUEST CABIN
The galley is immediately adjacent to the oval settee and navigation area. Like the navigation area, it too has two work areas. There is an inboard work area, the central island with a pass-through to the navigation area. All countertops are white Formica. There is plenty of counterspace, double stainless sinks, custom Groco fixtures and a handy in-counter storage compartment. The outboard work area features a custom Broadwater four burner range and temperature-controlled oven, a Sea Frost in-counter, refrigerator with both top and front access doors, and a Sea Frost in-counter combination unit, (refrigerator or freezer), again with top and front access doors. Featuring 73” galley headroom.
The large "L" shaped navigation console is a signature Tayana 48 feature and marvelous to see and use. It is located just to starboard of the companionway. It offers two work areas, two cabinet faces at 90 degrees to each other, and a fully adjustable swivel chair. Because of the "L" shaped console there is also plenty of cabinet face for electronics, all at eye level, and all within easy reach. You must see and try it to realize the full effect and value.
“Serene” is a 1996 48’ Cutter rigged Robert Perry designed Tayana 48 sailing vessel. The Tayana line of sailing vessels was heavily built coastal/offshore cruisers built for both near coastal as well as extended offshore blue water cruising. “Serene” is a very well-equipped Tayana 48 with a full complement of offshore sailing equipment that has been maintained by the present owners to very high standards. The rigging was professionally inspected from deck level and aloft by Christian Damm in 2018. “Serene” is a turnkey vessel that is ready for any extended blue water cruising.
Contact our team to schedule a private showing.
Love this yacht? Get notified on price reductions and other related updates.
Set Price WatchStay informed on all things yachting, including notable sales, industry updates, events, and boating tips with our newsletters.
Sign Up